Align 3S1P Li-Poly Battery 30C (11.1V/2200mAh)

This is a Align 3S1P Li-Polymer Battery, and is intended for usage with the Align T-Rex 450 line of helicopters.

Features:

This Li-poly battery is using series/balancing style. It features high effective and high discharge, and a inspection device is utilized to match packs.


Appropriate for T-Rex 450 series


Recommend to discharge the battery within 80% of ranked discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will decrease due to high current, high temperature and over-discharge)

Specifications:

Max Continuous Discharge: 30C

Rupture Discharge: 40C

Small Operating Temperature: Approx. 40-64?C (104-147?F) (within 80% of ranked discharge)

Optimum Temperature: 80?C (176?F)

Output: 11.1V(3S1P)2200mAh 

Measurement: 36x104x22mm

Weight: 165g

Keep in mind: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of limit capacity of the pack after full crediting ensure an excellent cycle performance. It is recommended to completely charge a brand brand-new battery prior to using and only discharge the battery 50% for very first 5 cycles. Constantly monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.



Do not expose batteries to sunlight or store/charge batteries at the temperature above 35?C or in a closed car. The high temperature environment might trigger damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery till it has actually cooled entirely. Wait about 20 mins, then examine prior to recharging.