Align 3S1P Li-Poly Battery 30C (11.1V/2200mAh)

This is a Align 3S1P Li-Polymer Battery, and is meant for usage with the Align T-Rex 450 line of helicopters.

Features:

This Li-poly battery is using series/balancing style. It features high efficient and high discharge, and a inspection machine is used to match packs.


Suitable for T-Rex 450 series


Recommend to release the battery within 80% of rated discharge, keep 90% capability when over 100 cycles, keep 85% capability when over 150 cycles.(The cycle life and performance will decrease due to high current, high temperature and over-discharge)

Requirements:

Max Constant Discharge: 30C

Burst Discharge: 40C

Small Operating Temperature: Approximate. 40-64?C (104-147?F) (within 80% of rated discharge)

Maximum Temperature: 80?C (176?F)

Output: 11.1V(3S1P)2200mAh 

Dimension: 36x104x22mm

Weight: 165g

Keep in mind: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Releasing capability can't exceed 80% of the max capability of the pack after complete charging to guarantee an excellent cycle performance. It is recommended to fully charge a brand new battery before using and just release the battery 50% for very first 5 cycles. Always keep track of race time and/or set a low voltage caution on ESC (End voltage cannot be lower than 3.2v per cell). Do not utilize the battery that has too low a voltage.



Do not expose batteries to sunlight or store/charge batteries at the temperature above 35?C or in a closed automobile. The high temperature environment might trigger damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery up until it has actually cooled totally. Wait about 20 minutes, then examine prior to charging.