Align 2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Direction::
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of ranked discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will lower due to high current, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity can't surpass 80% of the max capacity after complete charging to guarantee a great cycle performance.Recommend to complete charge a brand name brand-new battery before using and just discharge the battery 50% for first 5 times making a great efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunshine or shop/ charge batteries at the temperature approximately 35℃ in a airtight automobile. The environment high temperature might trigger the damage or the threat of burst. If the battery ends up being hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then examine to charge. If against follow the original factory using guidelines, potentially trigger the battery to inflate or any dangerous accident takes place.
Do not leave the battery charger is operating unattended as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

This is a superb addition to the product currently being gone over.

T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's tiniest and most small 3D helicopter T-Rex 150 DFC, brings the exact same exceptional pedigree and design principle that originated from the successful T-Rex line of helicopters. Including strong power, exceptional flight control stability, and equipped with high end elements, far going beyond other helicopters currently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, developing power that will go beyond all your expectations. Metal DFC primary rotor head assembly including high end visual and exceptional flight performance; in addition, an integrated control system with specifically enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All these enable the T-Rex 150 DFC to posses the exact same stability, exceptional agility, and tail holding effectiveness as the bigger helicopters.

T-Rex 150 functions built in Futaba S-FHSS 2.4Ghz system, and support making use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To obtain the T-Rex 150 airborne, all thats required is inputting of parameters listed in manual into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that resembles the bigger helicopters, allows you to enjoy flying inside a restricted area. Newbies can even enjoy this with ease by just turning down the speed dial. The ingenious advancement T-Rex 150 will bring you a new dimension of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Devices:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic devices needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter