Align 2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Guideline::
Max Continuous Discharge: 30C. Regular operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and effectiveness will lower due to high existing, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability cannot surpass 80% of limit capability after complete charging to guarantee a great cycle performance.Recommend to complete charge a brand name new battery prior to utilizing and only discharge the battery 50% for very first 5 times to make a great effectiveness of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage defense on ESC (Cell voltage after stopping utilizing can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature as much as 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery ends up being hot while high existing discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then examine to recharge. If versus follow the initial factory utilizing guidelines, potentially cause the battery to inflate or any dangerous accident happens.
Do not leave the battery charger is operating ignored as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

This is a wonderful addition to the thing presently being gone over.

T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's tiniest and most petite 3D helicopter T-Rex 150 DFC, brings the same superior pedigree and design idea that stemmed from the effective T-Rex line of helicopters. Featuring strong power, superior flight control stability, and geared up with high end components, far exceeding other helicopters presently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, developing power that will go beyond all your expectations. Metal DFC primary rotor head assembly featuring high end visual and superior flight performance; in addition, an incorporated control system with specifically enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All these allow the T-Rex 150 DFC to posses the same stability, superior dexterity, and tail holding efficiency as the larger helicopters.

T-Rex 150 features integrated in Futaba S-FHSS 2.4Ghz system, and support making use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To obtain the T-Rex 150 airborne, all thats needed is inputting of parameters noted in handbook into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that resembles the larger helicopters, allows you to enjoy flying inside a restricted space. Novices can even enjoy this with ease by just refusing the speed dial. The innovative advancement T-Rex 150 will bring you a new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic devices needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter