Align 150 Vertical Stabilizer

Use for T-REX 150.

Specs:
Vertical Stabilizer x 2

Frequently bought with the product that you are presently reviewing.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

You will certainly like this item if you have the item above mentioned.

150 Feathering Shaft

Use for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Numerous others have bought this product along with the product that you are presently reviewing.

78T Main Drive Gear

Use for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This is a superb addition to the product presently being gone over.

20 Tail Blade

Use for T-REX 150.

Specs:
Tail Blade x 4
Length:41.35 mm
Weight:Approx 0.21g/single

Numerous others have bought this product along with the product that you are presently reviewing.

150 Landing Skid

Use for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Frequently bought with the product that you are presently reviewing.

150 Tail Boom

Use for T-REX 150.

Specs:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor install x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

This product praises the main item here.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Direction::
Max Continuous Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and efficiency will reduce due to high existing, high temperature and over-discharge)

NOTE::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capability cannot surpass 80% of limit capability after complete charging to make sure a great cycle performance.Recommend to complete charge a brand name brand-new battery prior to utilizing and just release the battery 50% for very first 5 times to make a great efficiency of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not decrease than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature as much as 35℃ in a airtight car. The environment high temperature might trigger the damage or the risk of burst. If the battery becomes hot while high existing discharging or flying, please do not charge the battery instantly. Wait to cool down(about 20 mins), then examine to charge. If versus follow the initial factory utilizing guidelines, perhaps trigger the battery to inflate or any unsafe mishap takes place.
Do not leave the charger is operating ignored as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

This is a superb addition to the product presently being gone over.

150 Painted Canopy

Use for T-REX 150.

Specs:
150 Painted Canopy x 1
150 Canopy nut x 4