Align 150 Vertical Stabilizer

Usage for T-REX 150.

Specs:
Vertical Stabilizer x 2

Regularly purchased with the item that you are currently checking out.

150 Main Shaft

Usage for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

You will certainly enjoy this thing if you have the thing just above stated.

150 Feathering Shaft

Usage for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Several others have actually purchased this item along with the item that you are currently checking out.

78T Main Drive Gear

Usage for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This is a great enhancement to the item currently being discussed.

20 Tail Blade

Usage for T-REX 150.

Specs:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

Several others have actually purchased this item along with the item that you are currently checking out.

150 Landing Skid

Usage for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Regularly purchased with the item that you are currently checking out.

150 Tail Boom

Usage for T-REX 150.

Specs:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor install x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

This item compliments the main item here.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Regular operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and effectiveness will reduce due to high present, high temperature and over-discharge)

NOTE::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity can't surpass 80% of limit capacity after complete crediting ensure an excellent cycle performance.Recommend to complete charge a brand brand-new battery before utilizing and only release the battery 50% for first 5 times to make an excellent effectiveness of the battery. Please make it a habit to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not decrease than 3.4V). Do not utilize the battery at inadequate of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature approximately 35℃ in a airtight vehicle. The environment high temperature might cause the damage or the danger of burst. If the battery ends up being hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then inspect to charge. If versus follow the initial factory utilizing rules, potentially cause the battery to pump up or any unsafe accident occurs.
Do not leave the battery charger is running ignored as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

This is a great enhancement to the item currently being discussed.

150 Painted Canopy

Usage for T-REX 150.

Specs:
150 Painted Canopy x 1
150 Canopy nut x 4