Align 150 Metal Tail Motor Mount

Usage for T-REX 150.

Requirements:
150 Carbon Vertical Stabilizer x 1
150 Metal Tail Motor Mount x 1
150 Mount fixing plate x 1
Socket button head screw x 2(#0-80) x 2

Right here is a wonderful item that many others have actually purchased the exact same time.

150 Main Shaft

Usage for T-REX 150.

Requirements:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

The listed below item likewise pairs truly well with the item being gone over.

150 Feathering Shaft

Usage for T-REX 150.

Requirements:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Right here is a wonderful item that many others have actually purchased the exact same time.

DS150 Digital Servo

Appropriate for T-Rex 150

Directions:
4g digital micro servos are special design for T-REX 150 DFC, includes to increase micro helicopter control speed and accuracy, let the micro/indoor helicopter has very same flight performance as large/outdoor helicopter.

Requirements:
Stall torque:0.8kg．cm(5V)
Motion speed:0.06 sec/60?(5V)
Score voltage:DC 4.8-6V
Dimension:19.8x8.4x23.3mm
Weight:4.3g
1520μs basic band

Accessories:
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Several others have actually purchased this item in addition to the item that you are currently checking out.

150 Metal Swashplate Performance Booster

Usage for T-REX 150.

Requirements:
150 Metal Swashplate x 1
F2.1 Linkage Ball A x 5(M1.2x1.3)
150 Main Frame x 1
150 Receiver Double sided tape x 1(26x18x2.5mm)

Right here is a wonderful item that many others have actually purchased the exact same time.

150 Fiberglass Painted Canopy

Usage for T-REX 150.

Requirements:
150 Painted Canopy x 1
Canopy nut x 4

You will certainly love this item if you have the item earlier discussed.

Body/Canopy Mounting O-Ring (8): BMCX/MSR




You will certainly love this item if you have the item earlier discussed.

150 Landing Skid

Usage for T-REX 150.

Requirements:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Several others have actually purchased this item in addition to the item that you are currently checking out.

150 Main Rotor Holder

Usage for T-REX 150.

Requirements:
150 Main rotor holder ? 2
681ZZ-d2 Bearing ? 4(Φ2.5xΦ6x2.6mm)
Socket button head collar screw ? 2(#0-80x6.2mm)
Socket Button Head Screw ? 2(#0-80x8mm)

Right here is a wonderful item that many others have actually purchased the exact same time.

150 Tail Boom

Usage for T-REX 150.

Requirements:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor mount x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

Right here is one more item that compliments the item being gone over.

T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's smallest and most small 3D helicopter T-Rex 150 DFC, brings the very same exceptional pedigree and design principle that originated from the effective T-Rex line of helicopters. Featuring strong power, exceptional flight control stability, and geared up with high-end elements, far going beyond other helicopters currently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, developing power that will surpass all your expectations. Metal DFC primary rotor head assembly including high-end visual and exceptional flight performance; in addition, an incorporated control system with specially optimized 3-axis gyro, receiver, electronic speed controller, and 4g servos. All of these enable the T-Rex 150 DFC to posses the very same stability, exceptional dexterity, and tail holding efficiency as the larger helicopters.

T-Rex 150 features built in Futaba S-FHSS 2.4Ghz system, and support making use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 air-borne, all thats needed is inputting of criteria listed in manual into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that looks like the larger helicopters, allows you to take pleasure in flying inside a confined area. Novices can even enjoy this with simplicity by just refusing the speed dial. The innovative breakthrough T-Rex 150 will bring you a brand-new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic devices required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter