Align 150 Feathering Shaft

Usage for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

This product compliments the main item right here.

150 Main Shaft

Usage for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Get this product to improve the one you are reading about.

150 Landing Skid

Usage for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Several others have actually bought this product together with the product that you are presently reading about.

DS150/155 Servo Gear Set

Usage for ALIGN DS150/155 Servo.

Specifications:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Right here is a wonderful product that lots of others have actually purchased the same time.

78T Main Drive Gear

Usage for T-REX 100S/100X/150.

Specifications:
Main Drive Gear(78T) x 2

This product is often bought with the above mentioned product.

DS150 Digital Servo

Ideal for T-Rex 150

Instructions:
4g digital micro servos are special design for T-REX 150 DFC, features to increase micro helicopter control speed and accuracy, let the micro/indoor helicopter has exact same flight efficiency as large/outdoor helicopter.

Specifications:
Stall torque:0.8kg．cm(5V)
Movement speed:0.06 sec/60?(5V)
Score voltage:DC 4.8-6V
Measurement:19.8x8.4x23.3mm
Weight:4.3g
1520μs standard band

Accessories:
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

This product compliments the main item right here.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Guideline::
Max Continuous Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and effectiveness will minimize due to high current, high temperature and over-discharge)

NOTE::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity cannot exceed 80% of limit capacity after complete charging to guarantee a great cycle performance.Recommend to complete charge a brand name brand-new battery prior to utilizing and just discharge the battery 50% for very first 5 times making a great effectiveness of the battery. Please make it a habit to always count time for flight, or please set a low voltage defense on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature might cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 mins), then examine to charge. If against follow the original factory utilizing rules, perhaps cause the battery to pump up or any harmful accident happens.
Do not leave the charger is running ignored as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g