Align 150 Feathering Shaft

Use for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

This product praises the main item here.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Get this product to enhance the one you are reading about.

150 Landing Skid

Use for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Many others have actually gotten this product together with the product that you are presently reading about.

DS150/155 Servo Gear Set

Use for ALIGN DS150/155 Servo.

Specs:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Here is a fantastic product that many others have actually bought at the very same time.

78T Main Drive Gear

Use for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This product is frequently gotten with the above discussed product.

DS150 Digital Servo

Ideal for T-Rex 150

Directions:
4g digital micro servos are special design for T-REX 150 DFC, features to increase micro helicopter control speed and accuracy, let the micro/indoor helicopter has exact same flight efficiency as large/outdoor helicopter.

Specs:
Stall torque:0.8kg．cm(5V)
Movement speed:0.06 sec/60?(5V)
Rating voltage:DC 4.8-6V
Measurement:19.8x8.4x23.3mm
Weight:4.3g
1520μs standard band

Accessories:
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

This product praises the main item here.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and efficiency will minimize due to high current, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability cannot exceed 80% of the max capability after full crediting ensure an excellent cycle performance.Recommend to full charge a brand name new battery prior to using and only release the battery 50% for first 5 times to make an excellent efficiency of the battery. Please make it a habit to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature approximately 35℃ in a airtight car. The environment high temperature could trigger the damage or the risk of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 minutes), then check to charge. If versus follow the initial factory using guidelines, perhaps trigger the battery to pump up or any unsafe mishap takes place.
Do not leave the charger is operating unattended as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g