Align 150 Carry Box-Black

Use for T-REX 150.

Specs:
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw driver(Blue/8.2g) x 2
0.9mm Hexagon screw driver(Red/8g) x 1
Components box x 1(78.5x60.9x21mm)
Weight:530kg

Several others have actually purchased this product together with the product that you are presently reviewing.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Several others have actually purchased this product together with the product that you are presently reviewing.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and performance will lower due to high present, high temperature and over-discharge)

NOTE::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability can't surpass 80% of the max capability after full charging to guarantee a great cycle performance.Recommend to full charge a brand name new battery before utilizing and just release the battery 50% for first 5 times to make a great performance of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage defense on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not utilize the battery at inadequate of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature approximately 35℃ in a airtight automobile. The environment high temperature might cause the damage or the danger of burst. If the battery ends up being hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then examine to charge. If against follow the initial factory utilizing guidelines, possibly cause the battery to pump up or any dangerous mishap occurs.
Do not leave the charger is operating unattended as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

Right here is a terrific product that numerous others have actually purchased the exact same time.

T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's tiniest and most small 3D helicopter T-Rex 150 DFC, brings the very same remarkable pedigree and design principle that originated from the successful T-Rex line of helicopters. Featuring strong power, remarkable flight control stability, and equipped with luxury elements, far surpassing other helicopters currently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, creating power that will go beyond all your expectations. Metal DFC primary rotor head assembly including luxury aesthetic and remarkable flight efficiency; in addition, an integrated control system with specially optimized 3-axis gyro, receiver, electronic speed controller, and 4g servos. All of these make it possible for the T-Rex 150 DFC to posses the very same stability, remarkable dexterity, and tail holding efficiency as the bigger helicopters.

T-Rex 150 features integrated in Futaba S-FHSS 2.4Ghz system, and support using Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 airborne, everythings required is inputting of specifications listed in manual into your transmitter, and binding of your transmitter.

Miniature size, control precision that looks like the bigger helicopters, allows you to take pleasure in flying inside a confined space. Newbies can even enjoy this with ease by just refusing the speed dial. The ingenious advancement T-Rex 150 will bring you a brand-new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic devices needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter