Align 150 Carry Box-Black

Use for T-REX 150.

Specifications:
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw driver(Blue/8.2g) x 2
0.9mm Hexagon screw driver(Red/8g) x 1
Components box x 1(78.5x60.9x21mm)
Weight:530kg

Lots of others have actually purchased this item in addition to the item that you are currently reading about.

150 Main Shaft

Use for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Lots of others have actually purchased this item in addition to the item that you are currently reading about.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Guideline::
Max Constant Discharge: 30C. Normal operating temperature level is approx. 40-65?C(within 80% of ranked discharge). Max. temperature level: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and performance will reduce due to high existing, high temperature level and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Releasing capability cannot surpass 80% of limit capability after full charging to make sure an excellent cycle performance.Recommend to full charge a brand brand-new battery prior to using and just release the battery 50% for very first 5 times to make an excellent performance of the battery. Please make it a practice to always count time for flight, or please set a low voltage defense on ESC (Cell voltage after stopping using can not reduce than 3.4V). Do not use the battery at inadequate of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature level approximately 35℃ in a airtight automobile. The environment high temperature level could cause the damage or the danger of burst. If the battery ends up being hot while high existing discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then examine to charge. If against follow the original factory using guidelines, perhaps cause the battery to inflate or any harmful accident happens.
Do not leave the battery charger is operating unattended as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Below is a terrific item that lots of others have actually bought at the very same time.

T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's smallest and most petite 3D helicopter T-Rex 150 DFC, brings the same superior pedigree and design concept that stemmed from the effective T-Rex line of helicopters. Featuring strong power, superior flight control stability, and equipped with high end components, far surpassing other helicopters presently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, developing power that will exceed all your expectations. Metal DFC main rotor head assembly including high end aesthetic and superior flight efficiency; in addition, an integrated control system with specially optimized 3-axis gyro, receiver, electronic speed controller, and 4g servos. All of these allow the T-Rex 150 DFC to posses the same stability, superior dexterity, and tail holding efficiency as the bigger helicopters.

T-Rex 150 functions integrated in Futaba S-FHSS 2.4Ghz system, and support using Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 airborne, everythings needed is inputting of criteria noted in manual into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that resembles the bigger helicopters, allows you to take pleasure in flying inside a confined space. Novices can even enjoy this with ease by just turning down the speed dial. The innovative breakthrough T-Rex 150 will bring you a brand-new dimension of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter