Align 131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Equipment, and is intended for usage with the Align 550, and 600E Pro.






Right here is another thing that praises the thing being talked about.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Equipment Set, and is intended for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive gear set on a T-REX 550, the helicopter must be geared up with the inclined gear setup. To figure out if your helicopter utilizes inclined gears or straight-cut gears, observe the main drive gear which will either have actually inclined or straight-cut teeth.



This thing is often purchased with the above mentioned thing.

520 Carbon Fiber Blade Set (550E)

This is an optional Align 520mm Carbon Fiber Main Blade Set, and is intended for usage with the Align T-Rex 550 helicopter.


Specifications:

Forming: Balanced wing

Length: 520x48x6.5mm

Width: 12mm

Shaft Diameter: 4mm

Weight: 200g/set



Right here is a wonderful thing that numerous others have bought at the exact same time.

Cnc Slant Thread Main Drive Gear/ 112T

Use for T-REX 550E.
Need to with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specifications:
Motor pinion gear 10T x 1
M4 set screw x 2(M4x4mm)

The below thing also sets really well with the thing being talked about.

90mm Carbon Fiber Tail Blade Set (2) (550)

This is a replacement Align 90mm Carbon Fiber Tail Blade Set, and is
intended for usage with the T-Rex 550 helicopter.

Features:

3K carbon fiber product
Forming: Balanced wing
Length: 90mm
Width: 4.9mm
Shaft Diameter: 3mm
Weight: 9g/set




Right here is a wonderful thing that numerous others have bought at the exact same time.

600PRO MAIN GEAR CASE SET

Use for T-REX 600E PRO/600EFL PRO.
Use with H70020,H60198,H60199?

Specifications:
One-way bearing HF1216 x 1(F12xF18x16mm)
Main gear case x 1
Hex socket salf tapping screw x 6(T3x6mm)
One-way bearing shaft x 1(F9xF12x34.7mm)
Washer x 1(F11.5xF18x0.8mm)