Align 120 Main Blades-Black

Use for T-REX 150.

Specifications:
Shape: In proportion wing
Length:120 mm
Weight:Approx 5.8g/set

Accessories:
Main Blades x 2 set
Main blade Decal x 1 set

Regularly purchased with the product that you are presently reading about.

150 Landing Skid

Use for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Get this product to boost the one you are reading about.

150 Main Shaft

Use for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Many others have purchased this product along with the product that you are presently reading about.

150 Feathering Shaft

Use for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Here is a wonderful product that many others have bought at the same time.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Direction::
Max Continuous Discharge: 30C. Regular operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and effectiveness will decrease due to high existing, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability cannot go beyond 80% of the max capability after full charging to make sure an excellent cycle performance.Recommend to full charge a brand brand-new battery before utilizing and just discharge the battery 50% for very first 5 times to make an excellent effectiveness of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not decrease than 3.4V). Do not use the battery at inadequate of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature approximately 35℃ in a airtight car. The environment high temperature could trigger the damage or the threat of burst. If the battery ends up being hot while high existing discharging or flying, please do not charge the battery instantly. Wait to cool off(about 20 mins), then check to recharge. If against follow the original factory utilizing rules, possibly trigger the battery to inflate or any dangerous mishap happens.
Do not leave the battery charger is running ignored as it might trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Here is a wonderful product that many others have bought at the same time.

20 Tail Blade

Use for T-REX 150.

Specifications:
Tail Blade x 4
Length:41.35 mm
Weight:Approx 0.21g/single

Here is one more product that compliments the product being gone over.

DS150/155 Servo Gear Set

Use for ALIGN DS150/155 Servo.

Specifications:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)