Align 120 Main Blades-Black

Use for T-REX 150.

Specifications:
Shape: Balanced wing
Length:120 mm
Weight:Approximate 5.8g/set

Devices:
Main Blades x 2 set
Main blade Decal x 1 set

Often purchased with the product that you are currently reviewing.

150 Landing Skid

Use for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Get this product to enhance the one you are reading around.

150 Main Shaft

Use for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Numerous others have purchased this product together with the product that you are currently reviewing.

150 Feathering Shaft

Use for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Here is a excellent product that lots of others have bought at the exact same time.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and effectiveness will reduce due to high current, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't go beyond 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand name brand-new battery prior to utilizing and only discharge the battery 50% for very first 5 times to make a good effectiveness of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping utilizing can not lower than 3.4V). Do not utilize the battery at inadequate of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature approximately 35℃ in a airtight car. The environment high temperature could trigger the damage or the threat of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then check to charge. If versus follow the original factory utilizing rules, possibly trigger the battery to inflate or any hazardous accident takes place.
Do not leave the charger is operating unattended as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

Here is a excellent product that lots of others have bought at the exact same time.

20 Tail Blade

Use for T-REX 150.

Specifications:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

Here is another product that compliments the product being talked about.

DS150/155 Servo Gear Set

Use for ALIGN DS150/155 Servo.

Specifications:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)