RC 4WD Trail Finder 2 Truck Kit w/Mojave II Body

This is the RC4WD 1/10 scale Electric Powered, Radio Controlled,
Trail Finder 2 Truck Package with the Mojave II Body.

**Additional Technical Information Will Be Added When It Becomes Available.**

FUNCTIONS:
Chassis: Trailfinder 2 machined billet aluminum ladder frame,
    guiding servo install on chassis, adjustable shock hoops
Own: 4 wheel, plastic shaft for wide driveline angles and
    resilience, steel universals
Transmission: R3 2 speed, wide 32P steel gears, with slipper
    clutch, billet machined aluminum case, 14/64 = 4.57:1, 1st equipment
    3.47:1, Second equipment 1.27:1
Transfer Case: Hammer transfer case, wide 32P hardened steel gears,
    8 ball bearings, cast metal casing, ratio: 1.47:1
Spur Equipment: Delrin construction,
Axles: Cast metal Yota II, ratio: 15/40=2.67:1, width at hex utilizing
    4mm TF2 hexes 6.94" (176.5mm)
Motor Mount: Billet aluminum, ten position adjustable, compatible
    with other brands of spur gears such as Traxxas, Axial and
    Robinson Racing
Suspension: Leaf spring
Shocks: Billet aluminum bodies, internal springs, oil-filled
Body: Two-piece molded tough plastic paintable finish, separate parts
    consist of mirrors, wipers, marker lights and clear plastic windows
    separate cab, cab back and dropped bed molded straight into body
Receiver Box: Molded plastic, created to resemble a fuel cell
Wheels: Stamped steel 1.55 OEM beadlock type 12mm hex .87" (22mm)
    wide, 6-bolt pattern, 9mm back spacing
Tires: Super grip Mud Thrasher with foam inserts
Bumpers: Reasonable tube type, winch install on front bumper
Service warranty: RC4WD warrants the product to be free from flaws when
    new. Limited guarantee does not cover damages due to normal wear and
    tear, user mistake of assembly or installation, user modifications,
    user's failure to carry out routine upkeep and addition of
    aftermarket parts or optional parts.

INCLUDES:
Trail Finder 2 with Body, Body Trim,
    Tires, Wheels, Decals, User's manual

REQUIRES:
Radio: 3-channel with 2 servos
Motor-ESC System: Novak Eiger Pro ESC/Rock Star Motor Combination
    recommended, NOVC3243
Battery: 6-cell NiMH or 2S LiPo
Battery Charger: To match selected battery
Building and track devices

SPECS:
Automobile;
Wheelbase: 11.3" (287mm)
Width: 8.5" (215mm)
Height: 8.25" (210mm)
Ground Clearance: 2.5" (57mm)
Last Drive Ratio: 1st 62.1:1, Second 22.75:1
Weight:
    Body;
Length: 19" (483mm)
Width: 7.5" (190mm)
Height: 5.25" (133mm)

REMARKS:

The listed below item also pairs really well with the item being talked about.



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Load
with Requirement Connector.

FEATURES:
Suitable sport pack for vehicles, trucks and boats

INCLUDES:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Basic
    Port

REQUIRES:
NiMH compatible charger such as the Duratrax Onyx series

SPECS:
Capacity: 5000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Min. Release Voltage: 5.4V
Optimum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard connector
Load Measurements: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Number of Welds per Connection: 6 spot welds
Cell Size: Sub-C