RC 4WD Superlift Superide 100mm Scale Shock Absorbers

This is a set of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum construction with white painted finish
Internal spring design

INCLUDES:
Two Superlift Off-Road 100mm Racing Shocks

NEEDS:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
Total Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Specifications (Length): 1.26" (32mm)
Stickers Specifications (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

COMMENTS:
Superlift is a registered hallmark of the Superlift Suspension
    Systems. The Superlift logo is property of Superlift Suspension
    Systems.

This thing compliments the above gone over thing.

Super Scale Shock Boot Black

These are the Super Scale Shock Boots in Black
for the RC4WD ARB and Superlift Shocks.

FEATURES:
Rubber construction
Versatile accordion style
Secure exposed shock shafts against dirt, mud and rocks

INCLUDES:
4 Super Scale Shock Boots in Black

SPECS:
Length: 1.63" (41.4mm)
Outer Diameter: 0.512" (13.01mm)
Upper Inner Diameter: 0.394" (10.01mm)
Lower Inner Diameter: 0.236" (6mm)

Right here is one more thing that compliments the thing being gone over.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum construction
Developed to fit the Yota II axles on the RC4WD Trail Finder II

INCLUDES:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
4 M3 x 15mm Set Screws (Z-S0650)
4 M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECS:
Weight: 0.5oz (14g)

This thing compliments the main item below.



This is the optional RC4WD Chassis Mounted Steering Package with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts steering servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum construction
Light-weight at just 2.64oz (75g)

INCLUDES:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
Five M3 x 6mm BHCS (Black) (Z-S0651)
6 M3 x 8mm BHCS (Black) (Z-S0652)
Two M3 x 10mm BHCS (Black) (Z-S0653)
4 M3 x 12mm BHCS (Black) (Z-S0654)
Two M3 x 16mm BHCS (Black) (Z-S0656)
Two M3 x 20mm BHCS (Black) (Z-S0895)
Five M3 x 8mm FHCS (Black) (Z-S0649)
Two M3 x 14mm SHCS (Black) (Z-S1055)
Two M3 Short Bent Plastic Rod Ends (Z-S0402)
Two M3 Medium Straight Plastic Rod Ends (Z-S0399)
6 M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

COMMENTS:
Includes additional link for use on the Axial Dingo set

Right here is a excellent thing that several others have actually purchased the very same time.

Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a basic size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal