RC 4WD Superlift Superide 100mm Scale Shock Absorbers

This is a set of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building and construction with white painted surface
Internal spring design

CONSISTS OF:
2 Superlift Off-Road 100mm Racing Shocks

NEEDS:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECIFICATIONS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
General Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Requirements (Length): 1.26" (32mm)
Stickers Requirements (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

REMARKS:
Superlift is a registered trademark of the Superlift Suspension
    Systems. The Superlift logo design is property of Superlift Suspension
    Systems.

This item praises the above gone over item.

Super Scale Shock Boot Black

These are the Super Scale Shock Boots in Black
for the RC4WD ARB and Superlift Shocks.

FEATURES:
Rubber building and construction
Versatile accordion style
Secure exposed shock shafts versus dirt, mud and rocks

CONSISTS OF:
Four Super Scale Shock Boots in Black

SPECIFICATIONS:
Length: 1.63" (41.4mm)
Outer Diameter: 0.512" (13.01mm)
Upper Inner Diameter: 0.394" (10.01mm)
Lower Inner Diameter: 0.236" (6mm)

Here is an additional item that praises the item being gone over.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building and construction
Developed to fit the Yota II axles on the RC4WD Trail Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
Four M3 x 15mm Set Screws (Z-S0650)
Four M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECIFICATIONS:
Weight: 0.5oz (14g)

This item praises the main item right here.



This is the optional RC4WD Chassis Mounted Steering Set with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts steering servo from axle installed to chassis installed with a
    panhard setup
CNC machined aluminum building and construction
Lightweight at just 2.64oz (75g)

CONSISTS OF:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
5 M3 x 6mm BHCS (Black) (Z-S0651)
Six M3 x 8mm BHCS (Black) (Z-S0652)
2 M3 x 10mm BHCS (Black) (Z-S0653)
Four M3 x 12mm BHCS (Black) (Z-S0654)
2 M3 x 16mm BHCS (Black) (Z-S0656)
2 M3 x 20mm BHCS (Black) (Z-S0895)
5 M3 x 8mm FHCS (Black) (Z-S0649)
2 M3 x 14mm SHCS (Black) (Z-S1055)
2 M3 Brief Bent Plastic Rod Ends (Z-S0402)
2 M3 Medium Straight Plastic Rod Ends (Z-S0399)
Six M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

REMARKS:
Includes additional link for usage on the Axial Dingo set

Here is a terrific item that several others have purchased the exact same time.

Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a conventional size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal