RC 4WD Superlift Superide 100mm Scale Shock Absorbers

This is a set of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building and construction with white painted surface
Internal spring design

INCLUDES:
2 Superlift Off-Road 100mm Racing Shocks

REQUIRES:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
Total Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Size: 0.13" (3.4mm)
Stickers Specifications (Length): 1.26" (32mm)
Stickers Specifications (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

REMARKS:
Superlift is a signed up hallmark of the Superlift Suspension
    Systems. The Superlift logo design is property of Superlift Suspension
    Systems.

This product praises the above talked about product.

Super Scale Shock Boot Black

These are the Super Scale Shock Boots in Black
for the RC4WD ARB and Superlift Shocks.

FEATURES:
Rubber building and construction
Flexible accordion style
Secure exposed shock shafts against dirt, mud and rocks

INCLUDES:
Four Super Scale Shock Boots in Black

SPECS:
Length: 1.63" (41.4mm)
Outer Size: 0.512" (13.01mm)
Upper Inner Size: 0.394" (10.01mm)
Lower Inner Size: 0.236" (6mm)

Right here is an additional product that praises the product being talked about.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building and construction
Designed to fit the Yota II axles on the RC4WD Path Finder II

INCLUDES:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
Four M3 x 15mm Set Screws (Z-S0650)
Four M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECS:
Weight: 0.5oz (14g)

This product praises the main item right here.



This is the optional RC4WD Chassis Mounted Steering Kit with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts guiding servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum building and construction
Lightweight at only 2.64oz (75g)

INCLUDES:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
Five M3 x 6mm BHCS (Black) (Z-S0651)
6 M3 x 8mm BHCS (Black) (Z-S0652)
2 M3 x 10mm BHCS (Black) (Z-S0653)
Four M3 x 12mm BHCS (Black) (Z-S0654)
2 M3 x 16mm BHCS (Black) (Z-S0656)
2 M3 x 20mm BHCS (Black) (Z-S0895)
Five M3 x 8mm FHCS (Black) (Z-S0649)
2 M3 x 14mm SHCS (Black) (Z-S1055)
2 M3 Short Bent Plastic Rod Ends (Z-S0402)
2 M3 Medium Straight Plastic Rod Ends (Z-S0399)
6 M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

REMARKS:
Includes extra link for use on the Axial Dingo package

Right here is a fantastic product that numerous others have actually bought at the exact same time.

Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a standard size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Running Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal