RC 4WD Interco IROK 2.2 Super Swamper Scale Tires (2)

This is a set of Interco IROK 2.2 Super Swamper Scale Tires
and Foam Inserts from RC4WD.

FEATURES:
Advanced X2 SS compound (extremely soft & extremely sticky)
Ideal performance in rocks, mud and snow
Fits 2.2" wheels only

SUCHES AS:
Two Interco IROK 2.2 Super Swamper Scale Tires and Foam Inserts

NEEDS:
Tire Glue, if not using beadlock wheels

SPECIFICATIONS:
Outer Size: 5.75" (146mm)
Width: 2.25" (57mm)
Inner Size: 2.04" (52mm)
Weight: 5.4oz (153g) each tire

The listed below product additionally pairs truly well with the product being reviewed.

2.2 Comp Beadlock Wheels XR10

This is a set of 2.2 VWS Beadlock Wheels for the Axial XR10 Rock Crawler.

FEATURES:
Black laser engraved beadlock rings
Compatible with Vanquish Products wheel weight systems
Very little beadlock hardware for assembly ease
Slim offset increases guiding response and strength

SUCHES AS:
Two Axial 2.2 VWS Beadlock Wheels

NEEDS:
Tires

SPECIFICATIONS:
Size: 2.2" (56mm)
Width: 1.7" (43mm)
Hex Size: 12mm

Below is a great product that numerous others have bought at the very same time.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
Eight hole design, constructed of extremely strong composite material
Gray aluminum ring
Fits 12mm hex hubs
True beadlock design, no messy gluing required

SUCHES AS:
Two Axial 2.2 Beadlock Wheels in Black with ring installing hardware

NEEDS:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

You will certainly like this thing if you have the thing previously mentioned.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Includes weight to increase stability on tough barriers
Advised for use on the front wheels to assist with climbing by
    decreasing the center of gravity
Steel building and construction

SUCHES AS:
2.2 Internal Wheel Weight Sounding with Mounting Hardware

NEEDS:
Securing to wheel with suched as hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

This product is often purchased with the above mentioned product.



This is the ST Racing Concepts Heavy Duty Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FUNCTIONS:
The stock plastic steering linkage on the Axial Wraith is a common
grievance of powerlessness on this automobile, as the stock pieces have the tendency to
be careless and weak in moving the torque and power originating from
the guiding servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a minor bent that allows for all the power and
torque from the servo to be transferred in a perpendicular angle to
the arm of the knuckle to guarantee no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One short link tube
Four M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
size: 7mm (9/32")
Brief link, length: 2-3/4" (70mm)
size: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
directly ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)