RC 4WD Gelande II Truck Kit w/Cruiser Body Set

This is the RC4WD 1/10 scale Electric Powered, Radio Controlled,
Gelande II Truck Set with the Cruiser Body.

**Addtional Technical Information Will Be Added When It Becomes Available.**

FEATURES:
Chassis: Machined billet aluminum ladder frame, steering servo mount
    on chassis
Drive: Four wheel, plastic shaft for wide driveline angles and
    sturdiness, steel universals, center installed 4x4 transfer case
Transmision: R3 Single speed, wide 32P steel equipments, with slipper
    clutch, pinion/spur 14/64 = 4.57:1, internal 1.78:1
Transfer Case: Wide 32P hardened steel equipments, eight ball bearings,
    cast metal casing, ratio: 1.47:1
Stimulate Gear: Delrin building, 64 teeth
Axles: Cast metal Yota II, ratio: 15/40=2.67:1, width at hex
    7.11" (180.5mm)
Motor Mount: Billet aluminum
Suspension: G2, double triangulated 4 link rear suspension,
    3 link front suspension with panhard bar
Shocks: 80mm billet aluminum bodies, double spring, oil-filled
Body: Molded difficult plastic, paintable white surface, over 50
    different parts consist of an interior, mirrors, wipers, in-depth dash,
    clear plastic windows and decals
Receiver Box: Plastic fuel cell type
Wheels: Black surface 1.9" marked steel beadlock type with lugnuts,
    aluminum locking rings
Tires: Super grip Dirt Grabber X3 compound with foam inserts
Bumpers: Front and back, built of machined billet aluminum
Warranty: RC4WD warrants the item to be devoid of problems when
    new. Restricted warranty does not cover damages due to normal wear and
    tear, user mistake of assembly or installation, user modifications,
    user's failure to carry out regular maintenenace and addition of
    aftermarket parts or optional parts.

INCLUDES:
Gelande II Truck Set with Cruiser Body, Body Trim, Interior,
    Tires, Wheels, Decals, User's manual

REQUIRES:
Radio: 2-channel
Motor-ESC System: Novak Eiger Pro ESC/Rock Star Motor Combination
    suggested, NOVC3243
Battery: 6-cell NiMH or 2S LiPo
Battery Charger: To match picked battery
Building and track equipment

SPECIFICATIONS:
Vehicle;
Wheelbase: 10.8" (275mm)
Length: 18.5" (466mm)
Width: 8.5" (215mm)
Height: 10.6" (270mm)
Ground Clearance: 2.3" (58mm)
Final Drive Ratio: 31.9:1
Weight: 6.57pounds / 2.98Kg
    Body;
Length: 16.3" (414mm)
Width: 7.5" (190mm)
Height: 6.7" (171mm)

COMMENTS:
Transmission and axles are preassembled, and the maker does
    not state the size of ball bearings used in each part.