Align T-REX 800E DFC Flybarless Super Combo Helicopter Kit w/Motor, E

This is the Align T-REX 800E DFC Flybarless Super Combo Helicopter Set. This set includes an Align 750MX 450kV motor, a Castle ICE2 HV 120 Brushless ESC, 3 Align BL700H High Voltage Brushless Servos, one Align BL750H High Voltage Brushless Servo, 800 Carbon Fiber Rotor Blades, 115mm 3K Carbon Fiber Tail Blades and the incredible Align 3GX Flybarless System!

T-REX 800E DFC Functions: Developed specifically for aerial photography and cinematography
The long 800mm primary blades provide superior flight stability and high payload capacity
Equipped with DFC flybarless primary rotor system; the very low CG design efficiently lowers aerodynamic resistance and improves flight stability characteristics
Carbon material combination technology is used in the frame plate structure, resulting in simple upkeep and operation convenience
The frame has a mounting place for the optional Align aerial gimble system upgrade, which can be installed with no adjustments
Committed APS control unit and sensor unit installing platform to streamline setup
Ingenious sliding battery tray rails anchored into the 3K side frame, supplying easy battery gain access to and defense
Leading installed motor base, enabling blade drafts to cool the motor efficiently
Motor install consists of 3rd bearing block to provide motor shaft assistance; efficiently lowering torque induced shifts and minimized equipment striping problems
Utilizes high specification MOD1 112 tooth CNC helical primary equipment and MOD 1 helical tail drive equipment to increase equipment mesh area, and reduce equipment noise during flight
Leading installed ESC platform to take advantage of primary blades airflow for effective cooling
New light-weight H-shaped electrical device retention system for defense, as well as ergonomically correct design to streamline operation
Equipped with 750MX series high effectiveness brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve total power output
Revamped gear box with more structured design also allows for simpler disassembly
High quality redesigned tail gearbox design, integrated with an upgraded dual point installed tail pitch control assembly to reduce slop and boost rudder control precision
High torque rated one method bearing base
High precision bearing supported dual push point rudder control design
High speed rated thrust bearings included into the tail blade grips
High grade painted fiberglass canopy with redesigned 4 point anti-vibration installing mechanism to streamline setup
Revamped CNC aluminum alloy installing plate

T-REX 800E Specifications:

Length: 1490mm

Height: 400mm

Main Blade Length: 800mm

Main Rotor Size: 1780mm

Tail Rotor Size: 301mm

Motor Drive Equipment: 13T

Main Drive Equipment: 110T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 22T

Own Equipment Ratio: 1:8.46:4.73

Weight (with Motor): 3516g

Flying Weight: 5400g

3GX Programmable Flybarless System Features:

Revamped 3GX represents a brand-new generation of multi-function flybarless system. The dramatically improved performance will create an instant influence on any lover.
3GX is currently the smallest and lightest flybarless system on the market and includes 2 ports to directly connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated guideline on the computer setup software application directs the user through a step by action setup process, enabling quick setups without omitting any actions.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection set, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed to decrease electronic wire mess.
A library of pre-configured 3GX settings specifically offered for T-Rex series of helicopters, enabling pilots to accomplish the most optimum setup for their helicopters.
3 levels of flight mode are offered on the 3GX to provide different feels for starting and advanced pilots.
Custom-made parameters have actually been opened up in 3GX to enable pilots to tweak various settings for swashplate and rudder. Settings export function enables custom-made settings to be shared amongst buddies.
3GX utilizes brand new gyroscope sensing units of the highest specs when compared with other flybarless systems currently on the market, enabling it to be used under harsh conditions. Double axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared with the last generation 3G. This is plainly obvious in steady hover as well as highly aerobatic routines.
Suitable for helicopters of all class from 200 to 700, glow engine or electrical powered. The superior vibration resistant attribute appears even when installed with more difficult double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly accomplished with precision.
3GX's rudder control resembles the high-end GP-780 gyro because rudder sensitivity is catered specifically for the helicopter's rudder reaction characteristics, enabling consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilot of all ability levels to experience the perfect combination in between 3GX and helicopter.
Extra peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system utilizes just 6 sensing units, 3GX?s amount to of 10 sensing units guarantee positioning of helicopter with superior accuracy, supplying the ultimate option for aerial photography or other special functions.

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V

T-REX 800E DFC Super Combo Includes: (1) T-REX 800E DFC Packages Set


(1) 3K Carbon Fiber Tail Boom


(1) 800 Carbon Fiber Blades


(1) 750MX Brushless Motor(450KV)
(1) 3GX Flybarless system


(3) BL700H High Voltage Brushless Servo


(1) BL750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC


(1) 115mm 3K Carbon Fiber Tail Blades 

Needed to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Dial Pitch gauge
(2) 6S LiPo Battery Pack, 4500 ~ 5200mAh
(1) TWO LiPo Battery Pack, 1900 ~ 2300mAh