Align 150 Tail Boom

Use for T-REX 150.

Requirements:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor install x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

Frequently gotten with the item that you are presently reading about.

150 Main Shaft

Use for T-REX 150.

Requirements:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Want one more excellent item to enhance the above mentioned item?

150 Landing Skid

Use for T-REX 150.

Requirements:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Want one more excellent item to enhance the above mentioned item?

20 Tail Blade

Use for T-REX 150.

Requirements:
Tail Blade x 4
Length:41.35 mm
Weight:Approximate 0.21g/single

This is a wonderful enhancement to the item presently being gone over.

150 Vertical Stabilizer

Use for T-REX 150.

Requirements:
Vertical Stabilizer x 2

Many others have actually gotten this item along with the item that you are presently reading about.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Regular operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and effectiveness will minimize due to high present, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity cannot exceed 80% of limit capacity after complete crediting ensure a good cycle performance.Recommend to complete charge a brand new battery before utilizing and just release the battery 50% for very first 5 times to make a good effectiveness of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature might cause the issue or the threat of burst. If the battery ends up being hot while high present discharging or flying, please do not charge the battery immediately. Wait to cool off(about 20 minutes), then inspect to recharge. If against follow the initial factory utilizing guidelines, possibly cause the battery to pump up or any hazardous accident happens.
Do not leave the charger is running ignored as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g

Many others have actually gotten this item along with the item that you are presently reading about.

120 Main Blades-Black

Use for T-REX 150.

Requirements:
Forming: Symmetrical wing
Length:120 mm
Weight:Approximate 5.8g/set

Devices:
Main Blades x 2 set
Main blade Decal x 1 set

Here is a excellent item that numerous others have actually bought at the very same time.

150 Feathering Shaft

Use for T-REX 150.

Requirements:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)